Industrialtelephone.co.uk |
 |
|
Home Page Industry Supply Ex Certified Products Contact Us |
| Gai-Tronics RED ALERT Emergency Telephones, Analog, VOIP, Wifi | |
| RED ALERT Emergency Telephones have been designed for maximum environmental sustainability, high audio quality, and unparalleled monitoring capability. In addition to providing hands-free, two-way communications, a RED ALERT telephone can tell you its location, report call activity, activate up to two peripheral devices, and let you know when it is experiencing problems. When used with our TMA (Telephone Management Application) software, RED ALERT telephones will lower system test and maintenance time (and time is money!) while greatly decreasing liability issues associated with undetected, faulty equipment. No other telephone provides greater features, value, and reliability | |
Available in both Analog and VoIP or WiFi models, features include:
Voice Annunciation Option (Analog Models Only) The Voice Annunciation option provides the called party (security, police, etc.) the ability to activate a pre-recorded message within the connected RED ALERT ® telephone. Each RED ALERT ® telephone can be programmed locally or remotely for a voice message that will announce the telephone location, provide instructions, or whatever the message requirements are. A simple DTMF command allows the called party to activate the message at any time during the call. Extreme Cold Weather Option RED ALERT ® telephones are designed to operate to -20°C. For more extreme low temperatures, an Extreme Cold Weather option is available for analog models only. This option provides a plug-in power supply (120 V ac required) to activate an internal “heater” circuit and piezo (non-moving) EMERGENCY and CALL (if applicable) pushbuttons. This design prevents melting snow or ice from freezing the push button activation and allows operation to -40°C. Output Control Each RED ALERT ® Emergency Telephone is capable of providing two (2) separate isolated, solid-state switch outputs, each rated at 125 mA. Each output can be activated when the telephone is in use (strobe activation) or via remote dial-up (DTMF) command activation to control a peripheral device such as a gate or door latch, light, alarm, etc. Note: VoIP/WiFi Telephones’ outputs are rated at 8A. Retrofit Flush-Mount Telephones GAI-Tronics retrofit RED ALERT ® telephones provide the same functionality and durability as other GAI-Tronics telephones but are designed to be mounted into existing proprietary non-GAI-Tronics enclosures and towers (these units are designed for 6-hole mounting). |
|
| TMA - Health Reporting When connected to our TMA (Telephone Management Application) software, each RED ALERT ® telephone will be automatically recognized and logged in for SMART operation. If there is no TMA connected in the system, standard telephone operation will occur. Using TMA, each RED ALERT ® telephone will be polled on a scheduled basis to report:
 |
|
back to Help Point Telephones
|
 |